Applications:

  Metal powder kneader is specially used for metal powder injection moulding. Many materials such as  Iron-based alloy steel, stainless steel, nickel-based alloy, tungsten alloy, hard alloy, titanium alloy, magnetic material, Kovar alloy, etc can be processed by MIM technology. The following image will show the whole process of the MIM.

Equipment advantages

(1)  It only takes approx 1-2 hours for every batch .Also you can shorten or lengthen the mixing time to get a better dispersing result .Compared to the previous processing methods ,it is more efficient.

 Shorter time ,and don’t need to crush for mixing second time. Reduce the pollution in the process of crushing. ；

(2) The inner surface of the mixing chamber and pressing ram are sprayed with special wear-resistant material imported from German;

After surface treatment, the equipment has sufficient hardness to process different materials.  The service life of equipment is improved. Also reduce the pollution during  processing.

(3)  Heated and cooled by electrical bar and water channel in the side wall of mixing chamber.

The temperature probe is at the bottom of the mixing chamber, and the temperature of the material is accurately measured. Temperature heating and cooling are faster than conventional equipment.

(4)  The speed of the rotors is adjustable .  Avoid powder flying in the early stage . 

(5) The anti-leakage device adopts the mechanical shaft seal pressing technology and adopts a self-lubricating sealing ring seal, so that the sealing ring is always in a compression and sealing state during the mixing process.No leakage of powder when it is working.

Main parameters